Tweet
i have a 1989 yamaha 130hp oil injected it fires when it wants..I have checked the safety cut out switchs,all wiring,& battery cranks engine fine.I guess the question i have is which wire on pack by-passes all safety & over heating etc.. i would guess this is the place to start with my problem could someone help? thanks!!
-
-
Just-n-time Thanks For Info
JUST-N-TIME thanks for the info..I disconnected white wire from pack but still no fire....yamaha is new to me i'v always messed with mercury's this is a little different.Anyway i have read some postings on battery's so i put my charger on battery,i thought it was cranking fine the charger made a world of difference.the motor tried to start but did'nt.messed around a little more with it primed fuel ball real good the engine started...i think i'm missing something here i know for a fact it was'nt firing i held plug wire & cranked it did'nt pop me...i'm going home & try again today.
i have been working on automobiles basically all my life & now been a diesel tech for about six years but these outboards are alot different, again thanks for info... -
unplug main 10 pin harness and remote start.Comment
-
running fine for now
engine starting every time i guess we'll see on next outing thanks guys for info i'll be getting back to ya!!Comment
Comment