Looking for Machine shop in MA or NH

[dtmackey]

I'm wondering if anyone had a line on a machine shop capable of boring the Yamaha V76 degree block in the MA or NH area. I typically use a shop out of FL for most of the smaller stuff I do and shipping is reasonable, but with a 3.1L motor is gets expensive with shipping just to have it bored 0.020" over. I thought I had located a shop about 45 minutes away and dropped the block off, but he called me today telling me he could not bore it and is only setup for 60 and 90 degree motors.

I have a 2001 225 OS66 block and 2001 250 OS66 that I need bored.

Thanks in advance.

-David

[dtmackey]

All set, I finally found one.

D-