Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Fuel Management Gauge to GPS wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuel Management Gauge to GPS wiring

    Grettings,

    I have a 2004 F 150 TXRC on my boat. I recently installed a Yamaha fuel mangement gauge, which is working fine. However, the instructions say that the white wire from the FM gauge goes to the gps and also says that the black and red wires should not be used. My question is: shouldn't there be another wire (such as the black wire) in addition to the white wire connected between the FM gauge and the gps to complete the circuit between them? With no information coming from the gps to the FM gauge the mpg figures are not displayed on the FM gauge. All other functions of the gauge are working properly. Thanks in advance.

    Ron
    email: rjgorion@comcast.net
    Ron

  • #2
    Connect the GPS NMEA output lead to the white wire on fuel management gauge, the GPS ground and fuel management ground completes the circuit.

    boats.net
    Regards,
    Boats.net Forum Admin

    Buy Yamaha Outboard Parts at
    Discounts Up to 80% off Retail!

    Comment


    • #3
      Thanks for the info guys.

      Ron
      Ron

      Comment

      Working...
      X