Tweet
Replaced trim ram seal, and wanted to replace filters in gear pump. It separated hard because of corrosion, and a small part fell before I could see where it came from. It looks like some kind of restrictor, and its not on the exploded view. Can anyone tell me which hole it fits in?
-
-
be aware there is a valve assy consisting of a metal ball,a pin and a body. they are not sold sepratly and easy to lose a part. -
Thanks, I can see that one in the diagrams, but no matter where I look, I don't see that restrict or. I have the right manual for the 98, but its not there. My only guess is that the original was replaced by one from a differnt year.Comment
-
nope.
its either there or you lost it.
trust me, it drops out easily.Comment
-
Might it be item 15 in this illustration?
2003 115TXRB Yamaha Outboard POWER TRIM TILT ASSY 2 Diagram and Parts
There is a better illustration shown at Yam USA's website but you have to navigate to get there, where it shows up as item 16.
http://yamahamc.partsandwarranty.com...1408539&Page=1Comment
-
item 15 does contain a pin and a ball that fall out easily.
they go hide quickly.Comment
-
if you look at trim assy 1 you will see where the OTHER pin and ball goes.Comment
Comment