Tweet
Hello, I recently bought a used boat that has a 2015 F150XB on it with analog gauges for rpm. I would like to hook this engine up to my Garmin GPSMap 740 which can display useful information such as engine hours, pressure, tilt, fuel consumption.
So my questions are: 1) Does this engine have command link (NMEA 2000) output with engine information, and if so, where are the wires/connector found. I have looked in the engine for any unused outputs and do not see anything obvious, so it may already be making it to underneath my dash, if it exists.
Thanks in advance for any help and/or advice.
DLC
So my questions are: 1) Does this engine have command link (NMEA 2000) output with engine information, and if so, where are the wires/connector found. I have looked in the engine for any unused outputs and do not see anything obvious, so it may already be making it to underneath my dash, if it exists.
Thanks in advance for any help and/or advice.
DLC