Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

propellers - materials

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • propellers - materials

    I purchased a new set of 150 4 cycles engines. They came with a "stainless steel" propeller set. recently, I hit some sand and took some of the black paint off. I now see very strong rusting on parts of the exposed blades with some other areas having a normal stainless steel silver finish. I think the prop materials are poor since I have never seen stainless rust so much, the full surface is rust brown, with a small surface roughness s if it was CORE 10 or some other steel, and not stainles steel. Can any one advise on this?

  • #2
    miorelli,
    I'm sure there are different grades of "stainless", and you may see some rusting - although I have not seen any on my Power Tech prop that came with my 2000 C115 Yamaha.
    If you really want to know the answer, get in touch with a prop expert - he is the Power Tech prop rep for Louisiana - nice guy, and really knows the prop business. You can reach him at
    marcus@ptprop.com . He will answer your e-mail and give you his phone number.
    Good luck [img]smile.gif[/img] ,
    Ken K

    Comment

    Working...
    X