Tweet
I have a 2000 Yamaha 150HP Saltwater Series & the fuel gauge is erratic (it's the standard multifunction speedometer, fuel gauge, clock, & battery set-up). I ran the boat 3 days last week & the gauge showed full (all 7 bars blackened in a 70 gal tank), but put 30 gallons of fuel into the tank when I filled-up. Other times the indicator seems to register properly.
How do I check to see if the problem is the gauge ($$$), sensing unit (haven't found any info what-so-ever on this on the web), a setting, etc? The gauge worked fine for the 1st 3 years. At the end of last year it started acting-up (I ran out of gas even though the gauge showed 1/2 full ... found out later my kids had used the boat).
How do I check to see if the problem is the gauge ($$$), sensing unit (haven't found any info what-so-ever on this on the web), a setting, etc? The gauge worked fine for the 1st 3 years. At the end of last year it started acting-up (I ran out of gas even though the gauge showed 1/2 full ... found out later my kids had used the boat).
Comment