Tweet
I am switching my bass boat over from Merc to Yamaha. I have a 2002 225 Vmax that I am getting ready to rig. I have a Yamaha analog tach with oil warning lights, a trim indicator gauge, a 6x3 control box and a key switch.
Can someone please point me in the right direction as far as where to wire the tach and trim gauges, along with color codes? I have a 10 pin harness coming to the control box and to the key switch.
Do the trim gauge and tach wire to the key switch or do they have a separate harness that goes back to the engine? I only see a plug for the oil tank harness and the main engine harness on the engine. I have rigged one with a smart tach before, but never with an analog tach and trim gauge.
Please feel free to email me at heathk90@gmail.com if you have a schematic or can point me in the right direction as far as how to rig these gauges.
Thanks.
Can someone please point me in the right direction as far as where to wire the tach and trim gauges, along with color codes? I have a 10 pin harness coming to the control box and to the key switch.
Do the trim gauge and tach wire to the key switch or do they have a separate harness that goes back to the engine? I only see a plug for the oil tank harness and the main engine harness on the engine. I have rigged one with a smart tach before, but never with an analog tach and trim gauge.
Please feel free to email me at heathk90@gmail.com if you have a schematic or can point me in the right direction as far as how to rig these gauges.
Thanks.
Comment