Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

voltage readings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • voltage readings

    I just changed out my stator on a 1994 C 75 Yamaha & was checking out some of the voltages with my new DVA . The readings were different than the ones in my Seloc Book.
    Red to Blue 140 V - Red to Blue ohms 131.9
    Brown to Red 135V- Brown to Red ohms 1222
    W/R to W/Y 9V
    W/B to W/G 8.8 V
    B/W to B 150V on all 3 coils
    Do these readings look OK ? All tests were done with the engine running at idle speed .

    Thanks ,
    Sherman

  • #2
    Any one have an answer?

    Comment


    • #3
      What did the manual say?
      Not many of us have that motor or manual.
      The manual should give minimum voltages not exactly what you will read, but should be at least what is in the manual.
      I have never seen a Seloc Book so not sure how they post the numbers

      Comment

      Working...
      X