Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

control harness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • control harness

    I'm repowering with a 90TLR I purchased new Main wiring harness and New Key switch. The New Harness has 2 connectors One that plugs into the Key Switch. The other for the control, tilt and trim, it is a round connector 6-7 pin
    My exgisting control only has Bullet connectors 3 for tilt and trim, 2 for neautral, is there a adapter harness for this? Or do i have to splice them in, Or buy a New control that has this type connector.
    Last edited by hydra; 05-02-2010, 09:16 PM.

  • #2
    control harness adapter

    rigging diagrams show an adapter from main harness to control wiring ,does anyone no what the part # is ?

    Comment


    • #3
      control lead wire

      I think the part # is 704-82541-10 only shown on some control diagrams for some reason but is not shown in wire harnesses diagrams. please confirm use for 2008 main harness to older style with bullet connectors thanks

      Comment


      • #4
        Yes 704-82541-10-00 is the adapter harness you are needing.
        Regards
        Boats.net
        Yamaha Outboard Parts

        Comment

        Working...
        X