Tweet
I have a 2005 Skeeter zx 1790 with a F75 EFI yamaha tiller. When taken the dash apart I noticed that the wires going to the low oil lght and the temp light were not hooked up on one end. I may haved pulled the two wires that were tied together apart from the plug in. I am not sure if these wires should be hooked up to a powersource or the ground as there is two plug ins close by.. The other two individual wires coming off the lights look like they go to the sending units. Does anybody have a wiring diagram for this. It also looks like there is some other wires going no where. The harness that comes out behind the dash looks like the harness for the digital tac type. Can anybody e-mail me with a wiring harness diagram at john@donicht.us
-
-
That is probably awiring harness that Skeeter made and I don't have a Skeeter wiring diagram, here is Yamaha diagram.
6YRW0035F2Wiring.JPG
Comment