Repowering with Yamaha F250BTXR

[guttercall]

" I am repowering my boat with a new Yamaha F250BTXR and need a list of parts to go with it. I have the square gauges but need the following:
IE Part numbers to order:

1. Single Main Ignition Switch
2. Nmea 2000 Lowrance/Yamaha interface cable
3. Flush Mount Control for Command Link 6X7 ?????
4. Anything else that is needed to fully rig above.".

[boats.net]

The control box(6X7-48206-10-00 Flush Mount) can't be ordered through parts division, would have to be purchased at your dealer. It's a serialized unit and needs to be registered with outboard.
Assuming you have gauge kits then would also need one pigtail bus wire per gauge and one for control box, this is what is available
6Y8-82521-01-00 1ft pigtail bus wire
6Y8-82521-11-00 2ft
6Y8-82521-21-00 3ft
6Y8-82521-31-00 6ft
6Y8-82521-41-00 9ft
6Y8-82521-51-00 12ft

704-82570-08-00 Single engine Switch Panel assy
MAR-GTWAY-KT-00 NMEA 2000 Gateway

[guttercall]

Thanks for the Info

Thank you very much for the answer to my question.