Need some help on how to fill my trim on my 93 Yamaha S200TXRR 200hp outboard

[NEWBOATOWNER]

Hello all, I am a basically learning my boat mechanics as I have owned my boat for approximately 2years now. Need some help/direction please, on the following.

#1. How to fill my Trim oil, due to observing a tiny leak around the motor tilt cylinder and squeeky noise as it tilts up/down.

#2. How to open/take apart the trin cylinder to change the the seal possibly leaking.

Any help will be gladly appreciated.

Sonny.

[boats.net]

Raise motor to full trim up position, remove fill plug and fill with oil until level full.
You will need a spanner wrench(call boats.net at 877-408-1499 for special tools) to remove seal caps to replace seals.

[NEWBOATOWNER]

thank you much, i take it that the seal is not pressurized so i can change it myself.

Thanks again for the assistance