Hello,
I need to set up a 2009 25NWHS.... this is what my receipt says. I can't find much, if any, info on this motor. Does it go by some other model designation?
I saw an amazing list of just what was needed to rig a different model of 25 to another boat from a post 6 months ago... it looked like this:
boats.net
Senior Member Join Date: Dec 2009
Location: Lake Placid, Fl
Posts: 5,157
--------------------------------------------------------------------------------
Would need these parts for controls and steering
6L2-48501-11-00 Remote conversion kit
689-61350-02-00 Steering Arm
6J8-48511-51-4D Steering Hook
To make so can use key switch to start would also need
6L2-42725-50-00
6L2-86111-00-00
682-86117-00-00
6L2-86115-00-00
98580-05008-00
92990-05600-00 2 required
90480-10155-00
98580-04008-00 4 required
92990-04200-00 4 required
6L2-86112-00-00
97013-06012-00 3 required
92990-06100-00 3 required
93210-03261-00
6L2-82590-00-00
6K3-83557-00-00
I have an 11.2' center console that I am rigging, and want to fit this outboard up with a 703 remote control. The dealer only seemed to recommend one kit, which was the 6L2-48501-11, the cable connectors for the motor. I have that kit.
I want to be able to sit at the helm, and start the engine, steer the boat, and push forward on the throttle. Could anyone advise me on what I need?
Also, I want to know mimimum/maximum starting battery requirements. I would like to be able to run a 12V stereo for several hours while at a remote site.
Also, is there an "anti-theft" type of thru bolts for the hull? I am in a very very very high theft area.
Thanks!
Cpt Max
Chillaxin Yacht Charters
St. Thomas, USVI
I need to set up a 2009 25NWHS.... this is what my receipt says. I can't find much, if any, info on this motor. Does it go by some other model designation?
I saw an amazing list of just what was needed to rig a different model of 25 to another boat from a post 6 months ago... it looked like this:
boats.net
Senior Member Join Date: Dec 2009
Location: Lake Placid, Fl
Posts: 5,157
--------------------------------------------------------------------------------
Would need these parts for controls and steering
6L2-48501-11-00 Remote conversion kit
689-61350-02-00 Steering Arm
6J8-48511-51-4D Steering Hook
To make so can use key switch to start would also need
6L2-42725-50-00
6L2-86111-00-00
682-86117-00-00
6L2-86115-00-00
98580-05008-00
92990-05600-00 2 required
90480-10155-00
98580-04008-00 4 required
92990-04200-00 4 required
6L2-86112-00-00
97013-06012-00 3 required
92990-06100-00 3 required
93210-03261-00
6L2-82590-00-00
6K3-83557-00-00
I have an 11.2' center console that I am rigging, and want to fit this outboard up with a 703 remote control. The dealer only seemed to recommend one kit, which was the 6L2-48501-11, the cable connectors for the motor. I have that kit.
I want to be able to sit at the helm, and start the engine, steer the boat, and push forward on the throttle. Could anyone advise me on what I need?
Also, I want to know mimimum/maximum starting battery requirements. I would like to be able to run a 12V stereo for several hours while at a remote site.
Also, is there an "anti-theft" type of thru bolts for the hull? I am in a very very very high theft area.
Thanks!
Cpt Max
Chillaxin Yacht Charters
St. Thomas, USVI
Comment