F40DET european model

[vbh]

Hi,

I had a Yamaha F40DET, 4stroke, EFI, 4 cylinder, manufactured in 2008, European model. Unfortunately that engine was stolen.

I bought another F40DET, 4 stroke EFI, 4 cylinder, but manufactured in 2005, 2006 model (also European). I would like to buy a tiller and a fitting kit for this engine. What part numbers do I have to order?

From the stolen engine, I have the tachometer (6YR-W0035-Y1) with multi hub assy. Can I use this with the 2006 model engine? The link cable to the engine was cut. Which cables do I need?

Thank you

[boats.net]

Tiller handle would be
6X4-42101-01-00 Handle Main Body assy
6X4-42102-31-00 F40 Fitting kit
Yes the Command Link Gauges will work on a 2006 as long as it is an fuel injected model.
They probably cut the Pigtail bus wire these are available:
6Y8-82521-31-00 6ft
6Y8-82521-41-00 9ft
6Y8-82521-51-00 12ft

[vbh]

Tiller handle would be
6X4-42101-01-00 Handle Main Body assy
6X4-42102-31-00 F40 Fitting kit
Yes the Command Link Gauges will work on a 2006 as long as it is an fuel injected model.
They probably cut the Pigtail bus wire these are available:
6Y8-82521-31-00 6ft
6Y8-82521-41-00 9ft
6Y8-82521-51-00 12ft

The F40D EFI, 4 cylinders is identical with F50 and F60 (same powerhead and lower unit). The 2008 engine use 6X4-42102-2100 fitting kit. It's OK to order 6X4-42102-31-00 ?

Thank you very much .

[boats.net]

They list the -21 kit for F50-F60 and -31 kit for the F40 2006 and newer models, not sure what is different in kit but the -31 will fit the F40.

[vbh]

Thank you again, I will order the suggested part numbers.