Tweet
I recently replaced my Switch Panel (10-6K1-82570-08-00). I noticed that one of the red wires was not connected. The plastic 'plug" was still in the bullet connector indicating that it was never connected. Is this normal?
There are 2 round multi conductor plugs, one for each engine.
There is also 4 individual wires that go to each engine (Red, Green, Black, Yellow).
All 4 wires are connected on the Starboard Engine.
The red wire is not connected to the port engine. Is this normal?
There are 2 round multi conductor plugs, one for each engine.
There is also 4 individual wires that go to each engine (Red, Green, Black, Yellow).
All 4 wires are connected on the Starboard Engine.
The red wire is not connected to the port engine. Is this normal?
Comment