Recently my '06, 50 HP 2 stroke has some difficulty starting after sitting for a week or so.
The starter engaes briefly (to about 500 RPM) and then kicks out---no start
Many Repeated efforts, do the same thing, then finally starts at a low RPM( about 800) warms up then at 1100 or so, then all is OK.
Makes no difference if the bulb is soft or rock hard .
So, what's going on
Thanks in advance....
The starter engaes briefly (to about 500 RPM) and then kicks out---no start
Many Repeated efforts, do the same thing, then finally starts at a low RPM( about 800) warms up then at 1100 or so, then all is OK.
Makes no difference if the bulb is soft or rock hard .
So, what's going on
Thanks in advance....
Comment