If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
You would need the rectifier kit, part number 6G1-81970-00-00. Connect to two green leads(alternator leads) on motor to green wires on rectifier and connect battery leads from rectifier to battery.
I have 2007 15 MSH with the alternator already installed. I hooked the two green wires to the regulator and the output wires to a light. I am pull start, no battery. I just want an all around white light when the engine is running but I don't get any output with this wiring config. Do I have to have a battery for the regulator to work? Is there an option for a voltage limiter that works without a battery for my situtation?
Comment