Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Testing charging and sensor coils

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Testing charging and sensor coils

    I have a F6MSHZ. When testing the charging & sensor coils, what reading should I get, using a digital multimeter in the lowest resistance mode (200 ohms) or next level (2000 ohms)? When testing I am getting a 320 ohms reading, but does not stay there, it goes into infinity. Help...

  • #2
    The charge coil shoul be 290 ohms between brown and blue wire.
    The pulsor coil should be 240-360 ohm's between white/red and black wire.
    Regards
    Boats.net
    Yamaha Outboard Parts

    Comment


    • #3
      Thanks a lot

      Comment

      Working...
      X