Installation of Command Link Tach

[nsF90tlr]

I have a 2008 F90TLR (fuel injected four stroke) and happened upon a good deal for the square command link tach gauge (6Y8-8350T-01-BK). I received the gauge only - no other parts or instructions.

What parts are neccesary to install the gauge? I haven't been able to find an on-line resource for the Yamaha rigging guide. The Yamaha website has a PDF of the owner's manual for the gauge, but that manual refers to the "Command Link Multifunction Meter Installation Manual" which I have not been able to find online.

Any help would be much appreciated.

[boats.net]

Will need
(1) 6Y8-82521-41-00 wire lead
(2) 6Y8-81920-01-00 Mutli-Hub assy
(4) 6Y8-82582-11-00 Cap
(1) 6Y8-83553-01-00 power lead
(1) 6Y8-2819U-00-00 user guide
Will also need 1 Main Bus wire(to go from rear hub to hub in console) and 1 Pigtail Bus wire( go between hub at console and tach). They are available in lengths:
6Y8-82553-01-00 1ft Main Bus wire
6Y8-82553-50-00 10ft Main Bus wire
6Y8-82553-11-00 15ft Main Bus wire
6Y8-82553-21-00 20ft Main Bus wire
6Y8-82553-31-00 25ft Main Bus wire
6Y8-82553-41-00 30ft Main Bus wire

6Y8-82521-01-00 1ft Pigtail Bus Wire
6Y8-82521-11-00 2ft Pigtail Bus Wire
6Y8-82521-21-00 3ft Pigtail Bus Wire
6Y8-82521-31-00 6ft Pigtail Bus Wire
6Y8-82521-41-00 9ft Pigtail Bus Wire
6Y8-82521-51-00 12ft Pigtail Bus Wire

[nsF90tlr]

Do you know the part # for the Command Link Multifunction Meter Installation Manual? Are the two hubs necessary if this is the only gauge that will ever be installed and no add on sensors will be installed either?

[nsF90tlr]

Thanks for all your help. My email address is

[fromeo]

installation guide command link guage

Hi Boats .net,
I have a similar problem would you be able to also email me a copy of the installation guide much appreciated ....fromeo@heatcraft.com.au

[fish418]

command link

been looking over your post and was wondering if you know the wiring colors on the back of the command link speedo especially wire color to fuel sending unit pink or pink with black stripe

thank yoiu

Boats.net,

Can you send me the installation instructions for the command link gauges as well?

Command Link Installation

Boats.net,

Thanks for the information. My e-mail address is

[hans1159]

I am having issues getting my square command link speedo gauge to display speed. A copy of that installation guide sent my way also would be wonderful.

Thanks,
Craig

[72688]

Command Link tach

Hi. I just purchased a 2010 G3 with a Yamaha F90. Will take delivery tomorrow of it. I want to install the Command Link tach (only) but wanted to review the instructions for doing so before buying the kit, to make sure i get everything needed. Can i get a copy of the installation instructions as well please?
Thanks!

[Hooligan]

Command Link Install Manual

Boat.net

If you could send a copy my way I would greatly appreciate it.

Mike

[Aventura]

Command Link Multifunction Meter Installation manual please

Hi Boats.net. I am desperately in need of the installation manual as I am fitting twin 350s to a boat I'm selling and have experienced a fault I cannot diagnose correctly. My email is

Would really appreciate your help.

Stuart.

[waverunner]

install manual

could I ask for a copy of the install manual please?
email: cpiearcey@maticmind.it
Many thanks in advance

[Capt Dave]

Garmin GPS installation to Command Link

I would like to hook up my Garmin 4208 GPS with GDS 22 sounder to the command link gauges, how do I do this?

Also, I would like to get a copy of the command link installation manual. My email address is calypsopoet@bellsouth.net.

[mavr76]

Boats.net,

Please, could you send me the installation instructions for the command link gauges as well?

mavr76@gmail.com

Thank you very much.