704 binnacle dis-assembly

I have a 2000 704 dual con*****er. I 'm trying to take it apart to replace the throttle cable. Needless to say it has been tough trying to remove the screws. Which screws hold the two hlaves together. I removed the pass thru bolt near the bottom , but which ones need to be removed on top ?

[boats.net]

Don't remember exactly which ones but I think there was 2 from each side.

thanks, I'm lost and it can't be that hard to do.....http://www.yamahaoutboardparts.com/i...s/confused.gif

[jb123]

the center ONE on bottom and opposing 2 on top, just look for the recessed nuts.