Tweet
G day is it possable to run two tanks through a manifold to 3/8 fittings to a single fuel flow sender and then to fitters ect to twin 115 Hp 2 stokes saltwater Obs and use the fuel management gauge as normal.
-
-
No when one tank runs empty motors would shut off regardless of how much fuel is in other tank.
Each engine should have it's own fuel delivery line from tank. -
HI, You would have to run a fuel line from each tank to the supply side of the manifold,each fuel line would have to have a seperate shut off valve, run with one tank off and the other on. You should not have any problems doing it this way.
DennisComment
-
Fuel Managenent Gauge for twins
Cheers and i do hale valves on both supply lines and was more concerned about gauge function and fuel restriction.Comment
Comment