Digital speed and fuel meter wiring diagram

[boats.net]

Here is wiring and guide on Multifunction gauges.
6YRW0035F2Wiring.JPG

6YRW0035E1_F1 Installation Guide.doc

[vtbasspro]

DMS Gauges - Upgrade from Speed only to Speed/Fuel Management

I have the DMS gauges now, but I'd like to upgrade from the standard speed gauge to the speed/fuel management gauge. In looking at the posts, I know I would need the sensor and the sensor harness, but would I need anything else? It is on a 20' skeeter i-class w/ a 250 hpdi. Any help is appreciated.

Known parts needed:
6Y5-85752-01-00 Fuel flow sensor

Wasn't sure about the harnesses needed due to the shorter length of the boat.

Thanks,

Matt

[boats.net]

6Y5-83553-F1-00 is the wire harness going to sensor.

[mrgumdrop]

I have dual 2004 Yamaha 150 Four Strokes

Gauge 6Y5-83500-40-00 (BK)
2 - Fuel meter sender unit 6Y5-85752-01-00
Fuel management wire harness part #6Y5-83553-F1-00

I want to connect the Fuel Meter to my GPSMap 3205

Can you provide a wiring diagram?

Do you have instructions for installing the Fuel Meter sender units?

Thanks for your help!

[boats.net]

Fuel Management to GPS,
FMM GPS Connection.JPG

[BoRitchings]

Wiring diagram for 6Y5-83500-T0-00?

Here is wiring and guide on Multifunction gauges.
[ATTACH]264[/ATTACH]

[ATTACH]265[/ATTACH]

Do you have access to a similar diagram for the 6Y5-83500-T0-00 multifunction outboard tachometer? I need to trace down a problem with the display going dim.

[csperformance]

wiring diagram

Would you email me a copy of the diagram for twin engine fuel management application. trying to troubleshoot, thanks

[catarocket]

Another one in need

have twin 2005 F250s and have purchased the FMM/Speedo gauge,harness,two sending units and have all installed . now need more info on the actual connections under the console including to my Garmin GPSMAP 3206. There are no other Yahama gauges on the boat all gauges are Livorsi.
would appreciate it if you could send the wiring diagram to catarocket@yahoo.com. Seems like you get thousands of requests!
Thanks for the help.

Quick question is there supposed to be a seperate harness that connects the gauges to each other? I was shipped one harness that splits into two plugs, one taped red , one taped green and have attached those directly to the appropriate sending units. I presume thats all I need?

Thanks again!

[naz143210]

can digital speed/fuel e used with analog tach on f115

I recently bought a boat with a 2015 f115 four stroke engine that has a Yamaha analog style tach that functions perfectly. There is also a Yamaha digital speed/fuel management gauge on the panel that does nothing. Will the digital speed/fuel gauge work with an analog style tach.if wired correctly? The tach also has an oil and temp.light on it. Thanks in advance for any help.