Tilt-Trim cylinder leak

[LarryMc]

Yamaha 2004 50HP two stroke (model # 50TLRC)

Fluid is leaking from around the ram in the tilt-trim cylinder. I assume that one or more of the "O" rings and/or seals in the piston sub assembly need replacing. Is there a kit containing the necessary parts to rebuild the sub assembly or do I need to order the parts separately? There seem to be a lot of rings and seals in this assembly and I'm not sure which ones I would need.

Also, does anyone know what special tools would be required to do this job properly?

Thanks for any help.

[boats.net]

If it's leaking at ram then it would need seal and orings in the cap which are not sold seperate. You would have to get the piston sub assemble.

[LarryMc]

Thank's for the help.

trim rod assembly

Is the same true for the '01 HPDI 200? I was able to purchase the seals individually but can't figure out how to get the trim cap off the ram rod. Thanks in advance.

-Rich
Austin, TX