Another trim gauge question.

I have been tryiing to install a trim gauge on my 06 Alumacraft. I found the pink wire and black wire at the engine that is coming from the trim sending unit. The only pink wire I can find under the dash goes to the fuel guage.

Do I tee into the pink wire at the motor and run a wire up to the dash for the gauge?

Any help would be greatly appreciated!

2006 Alumacraft Trophy
2006 Yamaha 200HP four stroke
Analog Faria gauges

[boats.net]

No the pink wire under dash is for warning buzzer. You will need to install 6Y5-83653-10-00 Trim/Oil harness, connects to trim sender on engine and goes to trim gauge. You may have change connector on gauge end of harness(pink wire) to match terminal on gauge.