Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

'04 200 HPDI cuts out at idle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • '04 200 HPDI cuts out at idle

    new member here guys, looking for a little insight.

    I'm running twins 04 200HP (HPDI) both run fine but this year the starboard motor cut out and stalls at an idle but runs perfectly fine once I drop it from neutral into gear. Port motor has no problem at all.

    A big thanks to anyone that might have a suggestion, my manuals should be here on Monday and I hope to have a good head start

  • #2
    Try a new set of spark plugs and fuel filters.
    Regards
    Boats.net
    Yamaha Outboard Parts

    Comment


    • #3
      Originally posted by boats.net View Post
      Try a new set of spark plugs and fuel filters.
      Been there - done that. They were both running great until just as I was putting the boat away for the season. Went from the slip to the ramp and noticed that the one motor stalled at idle. Again, once I dropped it into gear she ran fine.

      Thanks for the reply anyway.

      Anybody else have a similiar prob?

      Comment

      Working...
      X