Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

tiller to remote question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • tiller to remote question

    I have a 25 hp elect start 07 yamaha on a carolina skiff. I want to change it to remote steering ...My motor is 25ESH ..serial 6L2K S 1024831....What parts do I need to make this conversion.....should I add engine gauges to the console?....I know that there is a steering bracket that attaches to motor that I can't find..Where do I get that bracket......I'm pretty handy...What tools do you need to make this change? ...I have a good Idea, but I want to make sure before I buy....would I need a Remote Conversion Kit?
    Attached Files
    Last edited by dcc134; 01-13-2008, 08:09 PM.

  • #2
    You would need
    6L2-48501-11-00 Remote attachment kit
    689-61350-02-00 Steering guide attachment
    6J8-48511-51-4D Steering Hook
    703-48230-15-10 Control Box
    order 2 control cables, MAR-CABLE-xx-SC(replace xx with length of cables needed)
    For the key switch and choke to operate from control box you would need:
    (1)6L2-42725-50-00
    (1)6L2-86111-00-00
    (1)682-86117-00-00
    (1)6L2-86115-00-00
    (1)98580-05008-00
    (2)92990-05600-00
    (1)90480-10155-00
    (4)98508-04008-00
    (4)92990-04200-00
    (1)6L2-86112-00-00
    (3)97013-06012-00
    (3)92990-06100-00
    (1)93210-03261-00
    (1)6L2-82590-00-00
    (1)6K3-82557-00-00
    Regards
    Boats.net
    Yamaha Outboard Parts

    Comment


    • #3
      Thanks for your help......After pricing everything ($435.00+ tax just for the parts) I'll pass on the key an the choke from the control box......
      Last edited by dcc134; 01-14-2008, 01:01 PM.

      Comment


      • #4
        Remote question

        Can you tell me if this remote will work with my 2007 25hp ESH ...6L2K S 1024831 Yamaha motor? part number 703-48207-17-10

        thanks

        Comment


        • #5
          No the 703-48207 is push to open throttle, 10 pin main harness with power trim switch.
          703-48230 is pull to open, 7 pin main harness and no trim.
          Regards
          Boats.net
          Yamaha Outboard Parts

          Comment


          • #6
            Thanks for your help......Can you tell me where this model number comes from....ESH ...6L2K S 1024831....When I'm looking up parts this model number never comes up...the dealer tells me that it is a bad number.....I want to modify what I have already done....
            Last edited by dcc134; 12-06-2008, 01:03 PM. Reason: to add info

            Comment


            • #7
              It's a 2007 25hp elect start, short shaft and tiller control.
              Yamaha Outboard Parts 2006 and Later 2-stroke 25ESR 6L2K-1018361
              Regards
              Boats.net
              Yamaha Outboard Parts

              Comment


              • #8
                Same Question as dc134

                Tiller to remote on Yamaha 30 MSHA - 6J8-S-112016
                No electric start or choke wanted
                just steering and throttle.

                Regards,

                Comment


                • #9
                  Originally posted by bguess View Post
                  Tiller to remote on Yamaha 30 MSHA - 6J8-S-112016
                  No electric start or choke wanted
                  just steering and throttle.

                  Regards,
                  Here is a link to the list of parts needed including a 701 side mount control box for manual start models, you would also need 2 control cables part number MAR-CABLE-xx-SC(replace xx with length cable needed)
                  REMOTE CONVERSION PARTS
                  Regards
                  Boats.net
                  Yamaha Outboard Parts

                  Comment


                  • #10
                    Originally posted by bguess View Post
                    Tiller to remote on Yamaha 30 MSHA - 6J8-S-112016
                    No electric start or choke wanted
                    just steering and throttle.

                    Regards,
                    I've had the 701 remote on my boat for about a year, but I want the remote that has the start an stop switch...I'll sell you the 701 remote....

                    Comment


                    • #11
                      rigging guide

                      I bought a rigging guide off of ebay that was going to help me install my 703 7 pin remote control box, but its no help......what would be the best source of info for installing a 703 remote control box?
                      Last edited by dcc134; 01-16-2009, 05:25 PM.

                      Comment


                      • #12
                        The Rigging Guide is the only source of information on control box installation. The control box installation is about the same except for electical and the main harness just plugs into harness on motor.
                        Regards
                        Boats.net
                        Yamaha Outboard Parts

                        Comment


                        • #13
                          tiller to remote 25 ESH

                          I've got a new 25esh model #6L2KS 1042060 from y'all recently. What parts do I need to convert tiller to remote? I do not want key start or electric choke. Will the parts mentioned in the previous threads work for this newer model #?
                          Jeff

                          Comment


                          • #14
                            Originally posted by jeff180 View Post
                            I've got a new 25esh model #6L2KS 1042060 from y'all recently. What parts do I need to convert tiller to remote? I do not want key start or electric choke. Will the parts mentioned in the previous threads work for this newer model #?
                            Jeff
                            6L2-48501-11-00 Remote conversion kit
                            689-61350-02-00 Steering arm
                            6J8-48511-51-4D Steering hook
                            701-48101-51-00 701 Side mount control box
                            (2) MAR-CABLE-xx-SC throttle/shift cables
                            Regards
                            Boats.net
                            Yamaha Outboard Parts

                            Comment


                            • #15
                              I have an 04 model 25 yahama that I also want to convert tiller to steering with no electric stuff just throttle and gears. What parts will I need to order to do this? 25mshc 6l2k 1006500

                              Thanks Tom
                              Last edited by fairwater; 07-11-2009, 06:37 PM.

                              Comment

                              Working...
                              X