I have a 98 150 VMAX. I recently cleaned out the carbs. I set the pilot screws and idle to specifications. The motor runs great for about half a day out on the water and then it idles poorly and will stall if not in gear. The plugs look to be oil fouled. I have cleaned and replaced, but the same thing happens each time. I have adjusted the pilot screws several times, same thing. The engine runs great with excellent excelleration and top end, so I assume that the compression is OK although I have no gauge to check it with. Just wondering if anyone has a suggestion.
Damn snook, every time I catch one my beer gets warm.
Damn snook, every time I catch one my beer gets warm.
Comment