remote 703 control help

[deanc777]

I Have a yamaha 50 1999 model and i just pulled a part the 703 forward control becasuse it was very stiff and making the motor idle to high. im not sure if i have put it back together right. it SHOULDN'T OF TOUCHED IT.
Does anyone know where to get a break down diagram of it off the net???.

[jb123]

1 thing i remember is that you need to lift the idler up about 1/3 and then put the 2 sides back together to align the idler correctly.

are you sure it wasnt your cable making it stiff?

[deanc777]

i think i will leave it to a expert but if anyone knows where to get a breakdown diagram would be helpful.