Tweet
I have a Century 300 with twin yamaha 250's and the dual engine fuel managemnet system. The P 9Port) and S (starboard) indicators only appear in the beginging and it is only provining information on one engine. Does anyone know where I should start and what the dip switches control.
-
TPO -
you should be able, while running to toggle between the 2 .
take out the non reading sensor, blow thru it with gauges on and see if you get a reading as they clog easily. -
The issue is I can't toggle between the two and that's not even an option because the PS indicators are not visible and pressing the set button doesn't do anything.TPOComment
-
did the gauge work properly prior...or is the boat new to you?Comment
-
Mine is the same way on my century. Let me know how you fixed it. ThanksComment
-
the system might not detect one sensor , as i remember i had to repair my harness from corrosion.Comment
-
The boat is new to me and has not worked right yet.TPOComment
Comment