Gear lube leak from LU

[Glenn Abuelhaj]

Engine is a 1989 Yamaha ProV 150.

Recently found LU gear lube on the ground.

Traced it up to a weep hole of sorts on the port side of the LU. I'm suspecting the gear shaft oil seal under the water pump finally let go.

I would like to know:

1. What parts I should order from boats.net
2. Best way to take the old seals out - any special tools?
3. Best way to install the new seals - any special tools?
4. Best way to position the seal lips when installing?
5. If this is something I can do or leave it to a pro?

Thanks for any and all help!!

Glenn

[Gianni]

if sure that forgiveness the paraoli of the pump water, their substitution e' simple, better to change also to all the packings-or-ring are not necessary particular tools

[Glenn Abuelhaj]

Thanks for replying!

Sort of what I was thinking...

Now to see what I can do to pressure test.....

Good luck!

[Gianni]

the test in reliable pressure not e', in how much the oil seal have the held back of from the outside inside to 0.5 atm begin gia' to lose! the better thing would be to put the

ciao