Throttle and Steering Cable

[Lowriderdave]

Question. The threaded rod end on both the throttle and steering cable are too shore to reach the mating ends on the engine. Now the cable is long enough, just not the ends. Is there a threaded extenderw/ coupling that I can get to get the extra 1 1/2 inch.

Thanks:

Dave

[jb123]

did you also install the throttles? inside your throttle handle/s, at the end of the throttle and GEAR cables you will see plastic screw on ends....you need the same ones at the motor and any dealer or this site will have them.