F15C conversion to Remote?

[Phil Lee]

I have a F15c electric start tiller I would like to convert to remote. Can anyone point me to the right parts to order? Can I keep the tiller functional if I do this?
I will put this on an antique 15' wooden runabout,I realise it may be underpowered but don't mind going slow, any prop recomendations?
One more, I have old style pulley/cable steering, how can I attach this to the Yamaha? Is there a bracket I can order? Thanks for any help!

[boats.net]

66M-48501-00-00 Throttle & shift kit.
63V-48511-01-00 Steering Hook
63M-82590-10-00 Wire Harness (if you using a control with start switch).
The tiller handle will have to be removed and if all of the steering cable is there it should bolt up to the above steering hook.

[Phil Lee]

Thank you for the fast response. I found everything here except the 63m-82590-10-00 wiring harness.
Also, what control would you recomend for electric start, the description was a little vague. Does these controls include the wiring harness?
Hate to be a pain in the keester but I sure appreciate this resource!

[boats.net]

I don't know why that part number isn't coming(that is the harness that connects to control box), I will check on that Monday. If your motor is electric start then you would use 703-48207-17-10 control box which comes with a 10 pin elect harness. You would have to get a adapter harness 703-8258A-00-00 but until I find out that bad part number I'm not sure which one you will need.

[Phil Lee]

I think I'll just go with a manual control and start the motor with the original setup. It would be nice to have the electrics built into the control but perhaps I can wire a switch later.
What manual control should I order from Ya'll for this motor? Cable number?
Also It appears the steering bracket comes with the Remote kit you sell, is this the case or should I order this seperately?
I promise I won't bother you again, I really appreciate it!

[Phil Lee]

If you get those numbers Monday I'm still interested, I may bite the bullet and do it right!Thanks!

[boats.net]

The correct part number for harness is 6AH-82590-10-00