Trim Indicator

[RUMBLEFISH]

Hi long time reader first time poster. I had a set of 06 200 hpdi's installed last year on my boat. I have the multi guage with the trim bar on the right but one of them is off. One of them shows about 1/4 trim up when both units all the way down. Is it a simple thing to just push a reset button to recalibrate when fully down?

Thanks

[jb123]

it could be the sender stuck/seized up or the activator is broken. its mounted to the tilt tube, towards the front of the motor under the belly pan, look for the wires. tilt your motor up and ensure ite sender moves with your finger.if it works, the adjust the plastic collar activator.

[RUMBLEFISH]

Great thanks for your help.