Trim rods on 115TXRY

[aginsa]

I finally got a break in the weather and took the guys out for some fishen. [img]smile.gif[/img]

I noticed that when triming down the motor trims slowly when it hits the rods, and a little ****y. Trim up is much quicker and quite. The boat is trailered and the trim rods are clean. Out of the water with the motor supported the trim rods retract slowly (without the weight of the motor) and with a higher wine. They do retract fully one after the other and then up smooth without the higher pitch.

Thoughts.

[boats.net]

Try putting a dab of grease on end of each trim ram where they contact stike plate on bracket. That should help with the ****ing. everything else you described is normal.