Yamaha Tilt & Trim

[rdrun]

Can any one tell me if it is necessary to remove the motor from the boat to replace the release valve on a Yamaha 1999 C90TLRX tilt trim.

rdrun

[Hamfisted]

No, not really, but you do have to pull the PTT unit out of the bracket.

1. Disconnect the leads from the relay in the bottom cowling.

2. Remove the tilt rod, bolts and nut and clamp bracket.

3. Remove the circlip and the complete power trim and tilt unit.


Then you'll have access to everything.


-Mike

[rdrun]

Thanks Ham. We"ll giye it a try