Tweet
What causes the priming bulb in the gas line to collapse while the engine is running? I know I probably just need to replace it, but I'd like to know what that indicates. I just installed a Racor separator and don't know if that might be part of it.
-
-
restricted line flow or clogged tank vent. -
That was quick. Thanks. Is the tank vent line something that can just be blown out with an air hose?Comment
-
Henry,
Try loosening the filler cap when the bulb collapses - if you hear air sucking in, and the bulb expands, then your fuel tank is not venting properly. Could be vent line is just kinked.
Good luck [img]smile.gif[/img] ,
Ken KComment
-
Thanks,
Going to give it a shot this morning. I was worried that the Racor filter was causing it.Comment
-
Ken, and jb123,
Just wanted to let you know that I went over at lunch time and pulled the external vent for the fuel tank. The screen was probably 80% blocked by salt and a dead spider, a big dead spider. Cleaned that out and now have full flow. Didn't have time to put it in the water, but will try it this evening.
BillBill AComment
Comment