Tweet
While replacing the pressure relief valve the fitting(6G5-12581-00-00) on the power head broke flush. This broke pretty easy so it was likely weak and ready to fail. Not upset and glad it broke in my driveway and not in the bay.
This is the fitting behind and below the junction box and Voltage regulator. Truely in a Mother effer of a place to get to and a flush break. Looking for suggestions on how to get to it.
Best options I can see at this point are dropping the junction box and removing the bracket that hold the lower cowling to make room. Anything other ideas from the Yammy gods would be appreciated.
Thanks!
SX225TXRA OX66
This is the fitting behind and below the junction box and Voltage regulator. Truely in a Mother effer of a place to get to and a flush break. Looking for suggestions on how to get to it.
Best options I can see at this point are dropping the junction box and removing the bracket that hold the lower cowling to make room. Anything other ideas from the Yammy gods would be appreciated.
Thanks!
SX225TXRA OX66