Tweet
I had to replace my trim switch which I did with no problems. When I went to put it back together I dropped it and had parts flying. I got it back together put had 2 parts left over see attached. I can get it back together but it shifts hard please help.
-
-
15 and 22 would be my best guess.
-
703
yes it looks like it thanks for your helpComment
-
part number 22
Could anybody tell me where part 22 goes the diagram really does not give a good indication where he goes I referring to the diagram that was sent to meComment
-
Looks to me like it goes into a nesting spot on the inner surface of the outer cover. Item number 25. Right below where the kill switch is installed.
Item 22 is called a cable anchor so it seems to me that it would be part of the stuff that attaches one end of the control cables to the control box. Seems to interface with item 58 which is a grommet.
Different illustration below showing the cable anchor from a different perspective.
Comment
-
703
That's look like its where it belongs. Can you point me to a parts list description where I can order some parts.Comment
-
Look at the top of this page the red Purchase Yamaha Parts. Pick the year of your motor and then HP and model numbers and you can find all the parts under the different sections of the engine. Just be sure you get your year, Hp and model correct.Originally posted by Norforkguide View PostDennis
Keep life simple, eat, sleep, fish, repeat!Comment
-
703
Where are finding these schemtics I broke the little plastic piece behind part 15 and cannot find anywhere to buy one. The part had a part number but its not a yahama part number omron marine part number 28z9rabComment
-
You may have to wait for Boscoe to come back on that one or one of the other more knowledgeable guys out here to help then.
Best I can help is you can go to the above and in the search box at the top of the first page type in 703 Throttle parts and you may find on the list the year of your throttle and a diagram of the parts and numbers.Last edited by dray0151; 09-09-2017, 07:32 PM.Dennis
Keep life simple, eat, sleep, fish, repeat!Comment
-
703 control
This was suppose to be simple task and it has snowed ball down a slope where now I have a broken part I cannot find on the schematic and no control box. We have a another control box that is new off a 115 yamaha 2015 are the boxes interchangeable mine is a 2009 my motor is a 2017Comment
-
703 control boxes are interchangeable.
The part behind item 15 is item 19 in the first illustration.
It is item 17 in the illustration linked below:
2006 and Later Rigging Yamaha Outboard CONTROL STANDARD SIDE 703 PUSH Diagram and PartsComment
-
703 control
The part is behind that and is plasticComment
-
Is it item 24?
You can go to the Yamaha US website and look at exploded views of 703 control boxes. Look until you find the part that you need. Plug the part number in the boats.net search box and it will give you price and availability.
Have you thought of taking the control box to a Yamaha dealer to have him fix it for you?Comment
-
703 control
This is part that broke it was behind the other partComment
-
Comment