Took boat out in flat/mild chop conditions after outboard has been lowered to lowest setting.
WOT 4500-4700 rpms
Tilt up increase to 4800-5000 rpms at WOT
Manufacture recommends full HP at 5500 rpms and max 59-6300 rpms
This is with a 13.5-15 pitch prop
So lowering outboard appears to address ventilation, However There is no change in over all RPM and outboard still under preforming.
WOT 4500-4700 rpms
Tilt up increase to 4800-5000 rpms at WOT
Manufacture recommends full HP at 5500 rpms and max 59-6300 rpms
This is with a 13.5-15 pitch prop
So lowering outboard appears to address ventilation, However There is no change in over all RPM and outboard still under preforming.
Comment