Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Wiring cleanup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by TownsendsFJR1300 View Post
    And have a pack or two of plastic zip ties! Most of those cables can be "rolled" into a fairly tight circle, zip tied and set in it's place.
    I 2nd this ^^^. Zip ties will be your best friend when cleaning up those wires. When I replaced my fuel tank a few months ago, the center console needed to be removed. While it flipped on its side I took time to organize all my wires. I think I used a pack of 100 zip ties . The hornet's nest of wires at the bottom of the console, 1st picture below. Ugh. But zip ties, 2nd picture. Ah ha.





    Jason
    1998 S115TLRW + 1976 Aquasport 170

    Comment


    • #17
      Fiberglass

      I actually didn't get any fiberglass splinters but working everything through the small hatch sometimes was a challenge. Had plenty of red marks on my arms afterwards...they went away overnight.

      Comment


      • #18
        Boy, that's looking MUCH better!
        2000 Yamaha OX66 250HP SX250TXRY 61AX103847T
        1982 Grady Weekender/Offshore (removed stern drive & modded to be an OB)

        Comment


        • #19
          I'm waiting for the "final" version!
          Scott
          1997 Angler 204, Center Console powered by a 2006 Yamaha F150TXR

          Comment

          Working...
          X