Recently had an issue with 2 of my 2006 Yamaha F250s turning over fine but not starting. Checked everything , no filters, etc and they still wouldn't start. Had a guy ask me if I happened to check the key switch for issues. I unscrewed the key switch panel and exposed the wires. I wiggled the wiring harness and wires that are attached to the key switches that were giving me trouble. After that I attempted to start the motors and they fired right up. Also the key switch sounded the buzzer as I was turning the key to start. Now it doesn't sound the buzzer as bad , but there is a faint sound of the buzzer.
Question is, whaif anything is in the wiring of the key switches that would keep the motors from starting? Like I said earlier, they turned over fine before but just didn't start. But after wiggling wires around, they started right up.
Ideas?
Question is, whaif anything is in the wiring of the key switches that would keep the motors from starting? Like I said earlier, they turned over fine before but just didn't start. But after wiggling wires around, they started right up.
Ideas?
Comment