Buy Yamaha Outboard Parts

Announcement

Collapse
No announcement yet.

Carb Settings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carb Settings

    I have a 1998 VMax that is out of whack. I cleaned the carbs and jets but now my settings are out. Short of buying a sync meter, can someone tell me what the initial settings should be. Thanks a lot!

  • #2
    What HP? What is the complete model?

    Comment


    • #3
      none of the 98 model V motors need a sync meter.
      however I have no clue what a sync meter is or how to use it.

      Comment


      • #4
        P200TLRW. Let me know if you need more numbers, Thanks, Mike

        Comment


        • #5
          Im probably calling it something wrong but its a gizmo that you plug into each carb which measures vaccuum. You tune / sync the carbs with each other.

          Comment


          • #6
            I believe Rod was saying that there is no place to hook them up to on your motor

            Comment


            • #7
              1-3/4 initial plus minus 1/4.
              Set it and forget it.
              If you need to play with carb, you have other problems. Timing? Just buy service manual.

              Comment


              • #8
                All of the set up procedures are described in the applicable service manual. Too detailed to provide here.

                Idle mixture screw setting
                Ignition timing
                Carburetor linkage adjustment
                Idle speed adjustment
                Pickup timing adjustment

                There is no procedure for synching the carburetors to each other via a manometer/vacuum gauge if that is what you are thinking.

                LIT-18616-01-87 YAMAHA C150W/S175W/L200W SV

                Comment


                • #9
                  Originally posted by amahaork View Post
                  1-3/4 initial plus minus 1/4. For the starboard carburetors.

                  3/4 initial plus minus 1/4 for the port carburetors

                  Set it and forget it.
                  If you need to play with carb, you have other problems. Timing? Just buy service manual.
                  Fixed it for you.

                  Comment


                  • #10
                    Thank you.

                    Comment


                    • #11
                      Thanks to boscoe informing us of the website where he gets engine schematics, this same website also offers free service manuals.

                      Not all SM's are offered, but many are. The OP is in luck because his SM is offered. So here ya go bud. Download the manual from the link below. The carb time and sync procedure is detailed in this manual.

                      https://www.vansoutboardparts.com/se...175w-200w/file
                      Jason
                      1998 S115TLRW + 1976 Aquasport 170

                      Comment


                      • #12
                        He should buy it, like we all. Don't get used to free stuff, bad for morality.

                        Comment


                        • #13
                          Originally posted by amahaork View Post
                          He should buy it, like we all. Don't get used to free stuff, bad for morality.
                          I hear ya, I bought mine. But I can't tell you how many times I've been given live bait at the boat ramp prior to heading out to net bait. I chalk this up to me being the bait giver at times. Comes full circle, IMO.
                          Jason
                          1998 S115TLRW + 1976 Aquasport 170

                          Comment


                          • #14
                            Given that these publications are not supposed to be publicly shared without compensation to the author (Yamaha), the link should probably be deleted.

                            Only those with valid, paid for paper publications are entitled to download the electronic version at no charge - at least that's my understanding.

                            Comment


                            • #15
                              Have you tried downloading and then opening one? Seems to be read only. I can't save one and reopen it later.

                              Comment

                              Working...
                              X