Tweet
I wanted to know if anyone has a recommendation for a muff flush that fits a 6HP outboard. The motor is on my sailboat in the water and not easy to always remove it to a horse and insert in a bucket of fresh water. Every muff I have reviewed is too big to fit the small space for the water intake opening..
-
-
The 6 HP model should have a port that can be used to inject fresh water for flushing.
ABB-FLUSH-JD-00 is the part number of the device that screws into the flush port. -
Thanks for the reply but I could not find any reference in the manual or locate where that part would connect within the unit.Comment
-
Is your question about what device to use to flush the motor or about where to connect a device? Or are you simply looking for a small set of muffs that will work?
What is the complete model of your motor?
6 HP two strokes have been available from 1986 thru 2000.
6 HP four strokes have been available from 2001 thru 2017.Comment
-
The model is F6LMHA, 2017 4 stroke. I hoping to find something to allow flushing without removing the motor off the boat.Comment
Comment