Hey hows it going? I have a pair of 1990 200 etxd on my boat. currently getting ready for the summer. The other day I was testing the manual oil pump switches on the engines. When I hit the switch on the starboard motor. The alarm went off and all 3 lights on the gauge were flashing. Any ides what this could be?
Announcement
Collapse
No announcement yet.
1990 200etxd 3 oil lights
Collapse
X
-
Hey, it is going well.
Low system voltage would be my guess. Inspect, clean and secure all electrical connections that you can readily get to on the motor, between the motor and the battery and in the boat.
On a 26 year old motor, more than likely used in the briney stuff, this is not uncommon at all.
Last edited by boscoe99; 06-14-2017, 03:28 PM.
Comment