If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There are several different 703 control boxes. The 90 requires a 10 Pin (control box with trim/tilt switch)and push to open throttle.If the control box was off of older 70hp or under it would be a pull to open throttle and would need a kit to convert it to push to open. Lift the throttle lever on box and see if throttle cable pushes out when opening throttle, If so you are good to go.
Comment