If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Saltwater IS the electrolyte for galvanic corrosion. If the engine block was all pure aluminum with no other metals touching it, then it would last forever. Unfortunately engine blocks cannot be made of pure aluminium because it is not strong enough. You have to put alloys in it to make it stronger and introduce all kinds of other metals to the block in the form of bolts, cylinder liners, ect....
Galvanic corrosion results.
Anyway you know all this. What am I explaining it for.
The thread was about how much salt in one gallon of water..just out of interest.
The direct answer to the question by the OP is as follows
1 gal of seawater weighs about 8.5 lbs. The salt concentration in seawater averages 3.5%, so there's about 0.3 lbs of salt in a gallon of seawater..
Comment