My 92 70 was running great, stopped to fish, started fine, but wouldn't plane or get over 3000 RPM, no alarms. Removed the carbs, they were clean, went through the adjustments, checked linkages etc. Put the timing light on, and when the pick up is on the #1 plug wire it lights up the timing mark for the #2 cylinder. On the #2 lead it lights the same mark. On the # 3 lead it lights up the #3 cyl timing mark. Checked the crank position sensor and it is within specs.
Any body ever run into this? Would the CDI box be the problem?
Thanks
Any body ever run into this? Would the CDI box be the problem?
Thanks
Comment