Torque for oil pump bolts on F225TXR??

[Stevec471]

Anyone know the proper torque for oil pump bolts on F225TXR? Can't find a spec anywhere. BTW, I know, they are very small bolts so they can't be but so tight,but since the oil pump is relatively important, I'd like to get it right the first time!! I'm guessing around 12 ft lbs.

[fairdeal]

the M6 bolts that hold the oil pump to the bottom of the crankcase?

likewise, I'm not seeing a specific value indicated

sp perhaps the "general torque" for M6 of 5.8 lb-ft applies

(truth be told, I would probably just do it by "feel")

[pstephens46]

Use a 1/4" ratchet. Good for those little fasteners.

I inherited a bunch of sockets from my brother.
Had a 9mm socket for a 1/2" ratchet. Why?

[Jackofalltrades]

I just broke 2 yesterday going for 5.8. the other M6s on the powerhead are around 4 ft lbs. Just doing a feedback test with my torque wrench.