I have a 2000 F115TXRY outboard with the round LCD tach and speed/fuel gauges. Both gauges are now faded and unreadable. I purchased good used speed/fuel gauge. When I removed my dash panel to remove the old gauge, I discovered that the one I purchased has an additional black pigtail with 5 or 6 pin female connector that my existing gauge does not have. I can see the other wires match up to the existing gauge, but I don't know what the extra pigtail is for or if it will work without it being connected if the other wires are connected. I would appreciate any help!
Mike
Mike
Comment